Calcite Filter Media
Natural calcium carbonate granules used in suitable water-treatment systems to help neutralise acidic water and raise pH. RMM Calcite Filter Media is intended for filter-vessel applications where controlled mineral dissolution can help reduce the corrosive nature of low-pH water.
A Natural Mineral for Acidic Water Neutralisation
Calcite is a naturally occurring form of calcium carbonate (CaCO₃). When acidic water passes through a bed of calcite granules, a portion of the media dissolves and reacts with the acidity in the water. This process can increase pH and add calcium and alkalinity to the treated water.
Calcite is commonly selected for low-pH water where the treatment objective is to reduce corrosive conditions in plumbing and water-distribution systems. Its performance depends on the incoming water chemistry, contact time, flow rate and filter design.
+ Calcite
→ Balanced pH
As water flows through the calcite bed, calcium carbonate dissolves in response to the water chemistry. The amount dissolved is influenced by pH, alkalinity, contact time and operating conditions.
Why Use Calcite Filter Media?
Calcite is used as a neutralising media in water-treatment systems. It does not replace a complete filtration or disinfection process; it is selected for its role in correcting acidic water chemistry.
Raises Water pH
Gradual dissolution of calcium carbonate helps neutralise acidity and move low-pH water towards a less corrosive condition.
Helps Reduce Corrosion
By correcting acidic water conditions, calcite can help reduce corrosion potential in compatible pipes, fittings and water systems.
Adds Calcium & Alkalinity
As calcite dissolves, it contributes calcium and bicarbonate alkalinity. This can also increase water hardness.
Simple Media Bed
Calcite is commonly loaded into a suitable filter vessel and replenished as the media is consumed during operation.
Mineral-Based Treatment
Uses naturally occurring calcium carbonate as the neutralising medium rather than relying only on continuous liquid chemical dosing.
Application-Based Selection
Media grade and filter design should be matched to pH, alkalinity, flow rate, contact time and water-quality objectives.
Where Is Calcite Filter Media Used?
Calcite is used in suitable water-treatment systems where acidic water requires pH correction. The treatment design should be based on a water analysis and the intended end use.
Borewell & Well Water
For suitable groundwater sources where low pH and corrosive water conditions have been identified through testing.
RO Permeate Re-Mineralisation
Can be used in selected post-RO systems to increase pH and add calcium, subject to the required treated-water specification.
Residential & Commercial Water Systems
For appropriately designed point-of-entry or central water-treatment systems requiring acidic water neutralisation.
Industrial Water Treatment
For industrial water lines and process-water systems where pH correction and reduced corrosivity are required.
How Does a Calcite Filter Work?
Calcite is normally used as a granular bed inside a properly designed filter vessel. Operating conditions should be selected by the water-treatment system designer.
Test the Water
Check pH, alkalinity, hardness and flow requirements before selecting the neutralising media and vessel.
Load the Filter Vessel
Fill the vessel with the selected calcite grade over a suitable support and underdrain arrangement.
Pass Water Through the Bed
Water contacts the calcite granules; a portion dissolves and reacts with acidity as the water flows through.
Backwash & Refill
Backwash as required by the system design and replenish media as its bed level decreases through consumption.
Operating frequency, backwash rate, vessel dimensions and media consumption depend on the water chemistry and system design. Follow the equipment designer's operating instructions.
Calcite Filter Media – Product Parameters
RMM has discussed a 16/40 grade for calcite media, with specific gravity around 2.7 and Mohs hardness around 3.0. Confirm the final values and current availability against the product COA/TDS before purchase.
| Parameter | Indicative Product Information |
|---|---|
| Material | Natural Calcium Carbonate (Calcite) |
| Product Form | Granular filter media |
| Grade / Size | 16/40 (as previously discussed; confirm availability) |
| Specific Gravity | Approximately 2.7 (to be confirmed by COA/TDS) |
| Mohs Hardness | Approximately 3.0 (typical calcite value) |
| Appearance | White to off-white; confirm actual supplied lot |
| Packaging | Confirm available pack size with RMM |
Important: Particle-size distribution, CaCO₃ content, moisture, insoluble matter, bulk density and packaging should be specified and confirmed for each order. Values shown as approximate are not a substitute for a batch-specific Certificate of Analysis.
What Should You Check Before Buying Calcite Media?
The correct calcite grade depends on the incoming water and the filter's operating conditions. Before placing an order, share the following information with your water-treatment supplier or system designer.
Design right.
Calcite raises pH by dissolving calcium carbonate; it can also increase hardness. It is not a universal contaminant-removal media and does not by itself disinfect water or remove dissolved salts, metals or suspended solids.
Calcite Filter Media
What is Calcite Filter Media?
Calcite filter media is a granular form of natural calcium carbonate used in suitable water-treatment systems to neutralise acidic water and raise pH through gradual dissolution.
How does calcite increase water pH?
When acidic water passes through a calcite bed, some calcium carbonate dissolves and reacts with acidity. The amount dissolved depends on the water chemistry and operating conditions.
Does calcite media increase water hardness?
Yes. As calcium carbonate dissolves, it adds calcium to the water and can increase hardness. The treated-water quality should be checked to determine whether additional treatment is needed.
Can calcite be used with RO water?
Calcite may be used in selected post-RO remineralisation or pH-correction systems. The grade, contact time and vessel design should be selected based on the permeate quality and target water specification.
Does calcite remove iron, bacteria or dissolved salts?
Calcite is primarily a pH-neutralising medium. It should not be represented as a standalone solution for iron removal, disinfection or dissolved-salt removal. Separate treatment stages may be required.
How often should calcite media be replenished?
Calcite is gradually consumed during operation. Replenishment frequency depends on incoming water acidity, flow, operating hours and system design. Inspect the media bed and follow the equipment supplier's maintenance schedule.
Which particle size should I choose?
Particle size should be selected according to the filter vessel, service flow, contact time and backwash design. Share your system details with RMM to discuss the available grade.
Can RMM provide technical details?
Contact RMM with your required particle size, quantity and application. Request the current TDS and COA to verify the technical parameters of the offered grade.